|
|
Post by yc3333 on Nov 14, 2013 20:46:38 GMT 8
Ever heard of plastidip? Its a form a reversible rubber coating first used in industrial applications. However, it is catching on in the modding scene as a very good form of DIY project, especially for newbies. Comes in a wide variety of colours, and the finishing is smooth matte. Messed up the spray? No worries, just remove and it will be good as new! Below are my DIY on the grille and side vents. Original colour is Brunel. Enjoy!    |
|
TNT
1st Gear
Posts: 44 
|
Post by TNT on Nov 24, 2013 23:46:38 GMT 8
Cool .... Very rugged look now. So any reference website on DIY plastidip? Where can you get it? Cheers!
|
|
|
|
Post by yc3333 on Nov 25, 2013 9:26:17 GMT 8
There are many DIY videos on youtube. For me I just trial and error as it is a reversible process.
Simply, patience is the key for DIY spraying. Spray a thin layer and allow to air for about 5-10minutes before the next layer. Repeat for at least 3-5 coat or more for a smooth finish.
Locally there are some agents bringing them in in small quantity. I got mine from Bosz Creation for less than $30 per can. If you need the contact lemme know
|
|
TNT
1st Gear
Posts: 44
|
Post by TNT on Nov 26, 2013 0:05:31 GMT 8
Many thx ... Saw one from ArmorAll ... Looks the same and cost $24 per can from Autobacs. Will try that out
|
|
|
|
Post by yc3333 on Nov 26, 2013 11:49:23 GMT 8
Referring to this?  www.armorall.com/product-types/custom-shield/It is only able to protect or last for 3 months? The colours are also limited to black, white, clear and grey. Buy a can to try and post results here? Im also curious as to whether it can last more than 3 months, and what is the finishing like |
|
TNT
1st Gear
Posts: 44
|
Post by TNT on Nov 26, 2013 18:00:47 GMT 8
Ya, that's the one. So the one u were referring to is which one?
|
|
|
|
Post by yc3333 on Nov 27, 2013 13:53:33 GMT 8
|
|
|
|
Post by yc3333 on Dec 2, 2013 11:07:14 GMT 8
Had some time last week to coat the front portion, the centre plate. Removed the whole plate:  After:  |
|
|
|
Post by blacklr on Dec 3, 2013 11:10:15 GMT 8
Next project will work on your ass diffuser ya!! Those who are interested dipping your ride do shout out here or share with us your dip mods.
|
|
TNT
1st Gear
Posts: 44
|
Post by TNT on Dec 9, 2013 18:43:49 GMT 8
Yeap, plan to get the plastidip from mxtradings. Wanna do the handles on the doors - it'll "refresh" the look a bit!
|
|
|
|
Post by blacklr on Dec 10, 2013 10:52:31 GMT 8
Greats!! Post pics after the dip.
|
|
|
|
Post by yc3333 on Dec 11, 2013 10:01:47 GMT 8
Yeap, plan to get the plastidip from mxtradings. Wanna do the handles on the doors - it'll "refresh" the look a bit! Coating the door handles might affect the sensitivity of your keyless door entry though |
|
TNT
1st Gear
Posts: 44
|
Post by TNT on Dec 11, 2013 19:41:30 GMT 8
Yeap, plan to get the plastidip from mxtradings. Wanna do the handles on the doors - it'll "refresh" the look a bit! Coating the door handles might affect the sensitivity of your keyless door entry though Freelander don't use keyless entry via handle, bro. |
|
|
|
Post by yc3333 on Jan 21, 2014 14:27:52 GMT 8
Just finish dipping the rear portion. Not as much impact as I hoped it would be... Before:  Preparation:  Final:   |
|
wyv9
1st Gear
Posts: 33
|
Post by wyv9 on Feb 13, 2014 14:45:46 GMT 8
Great stuff... More photo on your DIY , please..
By the way, other than the look, any other benefit?
|
|
