|
|
Post by jellyfish on Mar 24, 2015 16:00:56 GMT 8
Hi Guys,
My Ride have been chewing thru brake pads like no tomorrow, and thus far the stock pads does its job pretty well and can hold up to the high temperature coming down mountains till the rotors turn bluish colour, and actually they work even better when really hot, the judder before coming to a complete stop has disappeared, but after some relaxing driving they are back.
But recently I've gotten my hands on a set of 650Deg C brake pads for my ride front and rear, and cannot wait to slap them on to see the field test, feedback that these pads create some dust, but even the stock pads also generate enough of them to coat my rims up after a week of driving.
Stay tuned for test! |
|
|
|
Post by weedfield on Apr 8, 2015 17:25:52 GMT 8
Hi Guys,
My Ride have been chewing thru brake pads like no tomorrow, and thus far the stock pads does its job pretty well and can hold up to the high temperature coming down mountains till the rotors turn bluish colour, and actually they work even better when really hot, the judder before coming to a complete stop has disappeared, but after some relaxing driving they are back.
But recently I've gotten my hands on a set of 650Deg C brake pads for my ride front and rear, and cannot wait to slap them on to see the field test, feedback that these pads create some dust, but even the stock pads also generate enough of them to coat my rims up after a week of driving.
Stay tuned for test! jellyfish, what aftermarket pads are you using? I bought a set of project mu (rear), will be putting them on when the rears wear to 3mm. Will you be changing to aftermarket rotors and brake lines? |
|
|
|
Post by jellyfish on Apr 10, 2015 20:38:39 GMT 8
I have just got a set of REMSA pads. I've yet to slap them on, brake pads still holding still. just did a check last week when I replaced 2 of my warped rims!!! stock 20 inch. Pocket one hole now.
|
|
|
|
Post by blacklr on Apr 12, 2015 19:18:24 GMT 8
I have just got a set of REMSA pads. I've yet to slap them on, brake pads still holding still. just did a check last week when I replaced 2 of my warped rims!!! stock 20 inch. Pocket one hole now. Wraped rims? Wow what had happened? |
|
|
|
Post by jellyfish on Apr 13, 2015 7:55:44 GMT 8
Whacked a gigantic pot hole on NSHW, no way to avoid them, the rims is only slightly oval, and manage to drive back to sg, if its cheap taiwan knock off, I think it would have cracked em already, also partly I'm running very high tyre pressure, thus did not suffer any high speed blow out.
|
|
